C. Otto Gehrckens GmbH & Co. KG
O-rings and mouldings

Tabularly

Material
diameter


d2		Radial O-ring fitting grooveAxial O-ring fitting grooveRadius



r1		Installation
angle


z
Groove depth tGroove width bGroove depth t
+ 0,1
0		Groove width b
+ 0,25
0
dynamic
hydraulic
+0,05
0		static

+0,05
0
b
+0,05
0
1,000,750,701,580,701,900,300,62
1,501,151,052,191,102,800,300,92
1,781,401,302,531,303,200,301,10
2,001,601,502,781,503,400,301,15
2,502,001,903,371,903,900,301,43
2,622,102,003,512,004,000,301,50
3,002,402,303,982,304,600,601,53
3,532,802,704,672,705,300,601,80
4,003,303,105,233,106,000,602,03
4,503,803,505,903,506,500,602,28
5,004,303,906,483,907,400,602,53
5,334,604,206,864,207,600,602,70
5,504,804,407,054,407,601,002,83
6,005,204,807,594,808,001,003,09
6,505,605,308,175,308,401,003,35
6,996,005,808,685,708,701,003,60
7,506,506,309,296,209,501,003,86
8,007,006,809,886,709,801,004,12
9,007,907,7011,147,6011,101,004,64
10,008,808,6012,388,6012,201,005,15


All measurements in mm.

Please note: the values given in the table are only indications and are intended as approximate guidelines. Users are strongly advised to check these values for every specific situation (e. g. by repeated testing). In particular, the contact with the media to be sealed, the temperature at the time of use and the installation conditions may lead to deviations from the values given above.